With driving every day and a hectic life style it is easy to let the little things go for a bit to long. When you are in heavy traffic and it is the worst possible time for an mechanical problem that is when it is going to happen. There are some simple automotive repairs that you can do to try to avoid trouble on the road.
A radiator flush is a easy job that most everyone can do. A properly maintained cooling system is important. It keeps the engine cool and it also helps the AC cooling system functioning properly.
Before you begin the job make sure that you have everything you will need. The radiator flush solution and proper amount of coolant. The tools you will need are a rag, screwdriver, funnel and a receptacle for catching and storing the used coolant until it can be disposed of at a proper facility.
The first thing you need to be sure of is that the engine has had plenty of time to cool down. The last thing you want is to be burned by hot coolant (very painful). Once the radiator drain or the lower radiator hose has been removed from the radiator the fluid will drain. Take the cap off to speed up the process.
Be sure that the receptacle is positioned to catch all the engine coolant. If the coolant spills over it can be messy and lead to more clean up time. Coolant can be toxic to animals and it has a sweet taste so they will drink it if you let them and it is not good for them. The solution is do not let them drink it.
When the coolant is finished draining replace the plug or the hose which ever you removed. Then add the radiator flush and fill with water. Put the cap back on the radiator and start the motor. Turn on the heater and let the engine run. The instructions usually call for 10-15 minutes. After the motor has run for the instructed time turn it off and let the motor cool down again.
After the engine is completely cool drain the flush and water into the receptacle again. Then fill the engine with the proper amount of coolant for your area. The coolant bottle should tell you what is recommended for your climate. Some severe climates call for a 50/50 mix of coolant and water. Do not use only antifreeze in your cooling system as it is very corrosive.
There are a few simple automotive repairs that you can do yourself. Just remember to always make sure the radiator and engine is completely cool. The excess fluid should always be stored in an approved receptacle and discarded properly.
A radiator flush is a easy job that most everyone can do. A properly maintained cooling system is important. It keeps the engine cool and it also helps the AC cooling system functioning properly.
Before you begin the job make sure that you have everything you will need. The radiator flush solution and proper amount of coolant. The tools you will need are a rag, screwdriver, funnel and a receptacle for catching and storing the used coolant until it can be disposed of at a proper facility.
The first thing you need to be sure of is that the engine has had plenty of time to cool down. The last thing you want is to be burned by hot coolant (very painful). Once the radiator drain or the lower radiator hose has been removed from the radiator the fluid will drain. Take the cap off to speed up the process.
Be sure that the receptacle is positioned to catch all the engine coolant. If the coolant spills over it can be messy and lead to more clean up time. Coolant can be toxic to animals and it has a sweet taste so they will drink it if you let them and it is not good for them. The solution is do not let them drink it.
When the coolant is finished draining replace the plug or the hose which ever you removed. Then add the radiator flush and fill with water. Put the cap back on the radiator and start the motor. Turn on the heater and let the engine run. The instructions usually call for 10-15 minutes. After the motor has run for the instructed time turn it off and let the motor cool down again.
After the engine is completely cool drain the flush and water into the receptacle again. Then fill the engine with the proper amount of coolant for your area. The coolant bottle should tell you what is recommended for your climate. Some severe climates call for a 50/50 mix of coolant and water. Do not use only antifreeze in your cooling system as it is very corrosive.
There are a few simple automotive repairs that you can do yourself. Just remember to always make sure the radiator and engine is completely cool. The excess fluid should always be stored in an approved receptacle and discarded properly.
About the Author:
There are some easy automotive auto auto repair job jobs that can be done quickly. This can help to save money and can be a learning process also. Before you begin any automotive auto auto repair job job make sure that you have proper supplies and tools for the job. Get a totally unique version of this article from our article submission service
Posts
No comments:
Post a Comment